Free sample for Crusher Parts - Jaw crusher – Mets

Product description
Jaw crusher, the crushing production line is one of the most popular and often used as primary crusher and secondary crusher, can be used for crushing under 320 mpa compressive strength of all materials, such as basalt, granite, marble, limestone, bluestone, coal, gypsum, etc., are widely used in mining, smelting, building material, highway, railway, water conservancy and chemical industry, etc.

Working principle:
The jaw crusher is composed of frame, moving plate, side shield, transmission, adjusting device, flywheel, lubricating device, etc. Work part of the jaw crusher is two pieces of jaw plate, a fixed jaw plate (e), vertical (or the upper slightly extraversion) fixed in front of the body wall, the other is a movable jaw board (hereinafter referred to as dynamic jaw), tilt, and fixed jaw plate formed under the big small “V” type of crushing cavity, the fixed jaw jaw slabs with doing periodic reciprocating motion, sometimes separately, sometimes near. When separated, the material enters the crushing chamber and the finished product is discharged from the lower part. When approaching, the material between the two jaw plates is crushed, bent and split and broken.

Performance characteristics:
1. High crushing ratio and high crushing efficiency.
2. Reasonable structure, stable operation, overload protection and easy maintenance and debugging.
3. Multi-layer labyrinth seals, keyless bloating links and long service life.
4. The maximum feed is 250mm~950mm, and the maximum material is 20mm~350mm.
5. The maximum production capacity is 1000T/H.

About installation

Performance data
Main parameters:
Motor power (kw): 37-55 or 110-132 or 180-320 or 400-440
Inlet size (mm): 400*1080 or 600*1100 or 860*1520 or 960*2020
Production capacity (t/h): 30-50 or 50-80 or 70-120 or 130-180 or 160-250, or 280-350 or 400-600
Weight (kg): 9510 or 12120 or 14400 or 19800 or 45000 or 65000